How the binding is worked out
- Perimeter = 2 × (width + length).
- Length needed = perimeter + 12 inches for the corners and joining the ends.
- Strips: each strip is cut across the fabric, so it's about 40 inches long once the selvages are off. Joining strips on the diagonal uses roughly one strip width per seam, so we keep adding strips until the joined length covers what you need.
- Fabric = number of strips × strip width, rounded up to the nearest ⅛ yard.
Worked example: a 60" × 72" quilt
The perimeter is 264 inches, so you need 276 inches of binding. Seven 2½-inch strips join to 265 inches, which is short; eight join to 302½ inches. Eight strips × 2½ inches is 20 inches of fabric, so buy ⅝ yard.
Common questions
Straight grain or bias binding?
Straight-grain strips, cut across the fabric, are fine for straight edges and use less fabric. Bias binding stretches around curves and scalloped edges, and it wears a little better on a quilt that will be washed a lot. This calculator is for straight-grain strips.
Why join strips on the diagonal?
A diagonal seam spreads the bulk of the seam allowance along the binding, so it doesn't make a lump when the binding is folded over. See our guide to binding a quilt.