How the backing is worked out
The backing has to be bigger than the quilt top so the quilting frame or your hands have something to hold, and so nothing comes up short if the layers shift.
- Backing size = quilt width + 2 × extra, by quilt length + 2 × extra.
- Usable fabric width = fabric width minus the selvages. For 42-inch fabric that's 40 inches.
- Panels: how many widths of fabric, joined with ¼-inch seams, it takes to span the backing. Each seam uses ½ inch.
- We try both directions, seams running top to bottom (lengthwise) and side to side (crosswise), and show the one that uses less fabric.
Worked example: a 60" × 72" throw
With 4 inches extra on each side, the backing is 68" × 80". Two 40-inch panels joined together give 79½ inches, enough to span the 68-inch width, so the lengthwise plan is 2 panels × 80" = 160 inches, or 4½ yards. Seaming crosswise would take 3 panels × 68" = 5¾ yards, because two panels (79½") fall just short of the 80-inch length.
Common questions
Should backing seams run lengthwise or crosswise?
Either works. Pick whichever uses less fabric. Many longarm quilters prefer seams that run horizontally (crosswise) on the frame, so if your quilter says so, follow their preference.
When is wide backing worth it?
When the backing is wider than about 80 inches, standard fabric needs three panels and two seams. A 108-inch wide back covers it in one piece with no seams.