Barn quilt pattern designer
Press New design until you see one you like. Then print it with a pencil grid and the area of each paint colour for your board size.
Design #204-8. The link to this page always opens this exact design.
Paint for this design
Area of each colour on your board, for one coat. Most barn quilts need two or three coats of exterior paint on a primed board; check the coverage on your paint can.
| Colour | Share of the board | Area | |
|---|---|---|---|
| #F4EAD5 | 31% | 5.0 sq ft | |
| #A63A2B | 6% | 1.0 sq ft | |
| #22303C | 44% | 7.0 sq ft | |
| #D9A53F | 19% | 3.0 sq ft |
How to paint a barn quilt from this pattern
- Prime the board. Exterior-grade plywood or a sign board (MDO or aluminum composite) holds up best outdoors. Prime every side and edge.
- Draw the grid. Divide the board into the same number of squares as the pattern, using the letters and numbers on the printout to keep your place.
- Draw the shapes. Mark the diagonals for each triangle square. Lightly label each area with its colour.
- Tape and paint, lightest colour first. Tape along the lines, press the tape edge down firmly, paint, and pull the tape while the paint is still a little wet.
- Seal it. A clear exterior topcoat helps the colours last in the sun.
Prefer fabric? Each square of the grid is one quilt block unit, so an 8 × 8 design with 6-inch finished squares makes a 48-inch wall quilt. Use the half-square triangle calculator for the triangle squares.